- ページ 5

GPS Concox GT03AのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Concox GT03A 16 ページ。 Vehicle tracker

5.1 Install/Remove the SIM card

● Power off the device, remove the battery and external power

● put the SIM card in the SIM card slot

Note: 1. Please use a GSM SIM card

2. SIM card in the device should be enabled for GPRS

3. Caller ID of the SIM card in the device should be on

Warning: turn off the device before removing the SIM card. It is forbidden to install or

remove the SIM card while the power is on, otherwise the SIM card may be damaged.

5.2 Power on

The device is designed without power key and it will be turned on after installing a battery.

5.3 Charge the battery

When the red LED on the device starts to flash quickly, the battery should be charged.

Please remember to charge it before the first use.

● Connect the charger to power

● connect the charger with the device

● The charging process will take about 4-6 hours.

● The device can work normally during charging. Red LED being light indicates that it is

charging. When charging is finished, red LED will flash slowly.

Warning：the ambient temperature shall be 0℃～40℃ while charging. Please use the

charger provided by the manufacturer.

The device has a strong magnet in rear cover which could attach to any mental surface.