- ページ 4

タッチターミナル Anywire B281XB-02US-CC20のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Anywire B281XB-02US-CC20 17 ページ。

ページを印刷する

[Functions]

■Function list

Model

Speci cations

NPN input: 2 points,

ASLINKER

NPN output: 2 points

2-wire

NPN input: 1 point/output: 1 point

(non-isolated)

PNP input: 2 points,

cable type

PNP output: 2 points

PNP input: 1 point/output: 1 point

1 It depends on lot No. whether this function is available or not.

2 This terminal can be used in connection to the AnyWireASLINK unit for word transmission. Note that this terminal cannot handle word data by setting a word address.

3 To use these functions, a master unit that supports each function is required. For details, refer to the manual for the master unit together with this manual.

■Detecting functions (Status details)

Slave unit voltage

Sensing level drop

drop

○

[Function Compatibility by Lot No.]

This unit has undergone addition of functions and change of speci cations according to version upgrading.

Available functions and speci cations of the unit vary depending on lot No.

Function

Remote address change

Single unit simpli ed replacement

Word transmission

LED indication for single unit

simpli ed replacement function

4 This terminal can be used in connection to the AnyWireASLINK unit for word transmission. Note that this terminal cannot handle word data by setting a word address.

5 The single unit simpli ed replacement function works even if the lot No. does not support the LED indication for the single unit simpli ed replacement function.

(When the master unit executes the single unit simpli ed replacement function, addresses/parameters will be written, if speci ed conditions are satis ed.)

■How to check

Lot No. is indicated on the lot label.

Connection targets

General-purpose

transmission

sensors, switches

General-purpose

output devices

Functions

I/O disconnection

I/O short-circuit

○

Available with lot No. that indicates year and

month digits of "15J" or later

Available with S/W version "B" or later version

(If lot No. is indicated in 3 digits (year and

month only), these functions are not available.)

Back of this unit

-B281*B02U*CC20 4/17-

Functions

Bit

Single unit

Word

transmission

simpli ed

replacement

○

I/O power supply

drop

○

Lot No.

Example:

Lot No. 19ECBNB

H/W version

S/W version

Detection of sensor cable

disconnection

Remote

address

2-wire type

3-wire type

change

sensor

○

Function version

Address

Bit

Word

address

setting

○