- ページ 5
セキュリティシステム Concox GM01のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Concox GM01 14 ページ。 Concox gm01 wireless home alarm
ページを印刷する4. Performance parameters:
Serial
1
GSM Frequency
2
GPRS
3
Image Resolution
4
Image Sensor
5
External storage
6
Battery Capacity
7
Working Voltage/Current
8
Dimension
9
Weight
5. LED Indicators Status:
Red LED (Power/Working status)
Quick flashing(interval 0.1s)
Slow flashing(interval 1s)
Yellow LED (Arm/disarm status)
Slow flashing(bright 0.1s,dark2s)
Slow flashing(bright 1s,dark1s)
Green LED (GSM signal)
Quick flashing(interval 0.1s)
Slow flashing(bright 0.1s dark 2s)
Notice: LED indicators have two modes:
a) Hidden Mode: All indictors would turn off automatically after working 5minutes till user toggling Arm/Disarm
switch button.
b) Continuously Bright Mode: indictors would never turn off if the device is working.
Getting Start
1. Preparation:
Please make sure all accessories are complete when open the package.
Please make sure the SIM card installed in device and:
a) Works with GPRS network
b) Works with MMS function
c)
Works with SMS function
d) Works with Dialing function
e) Works with Caller ID function
Strona 5 z 14
rev. 1.0.1
USER MANUAL:
Specifications
Status
Solid red
OFF
Status
Solid Orange
OFF
Quick flashing
Status
Solid Green
OFF
GM01
Technical parameters
GSM 850/900/1800/1900MHz
Class 12
640 X 480
COMS 0.3 Mega Pixels
SD card, 2G (Maximum 4G)
800mAh
5V / 1A
82.5mm(L)×44.3mm(W)×28.7mm(H)
61g
Implication
Low battery
Normal operating
Battery charging
Battery power loss/Internal problem
Implication
Delay arming
Taking photo or recording video
Arming
Disarming
Arm (10 seconds countdown)
Implication
Searching (GSM Initialization)
Normal operating
GSM conversation/GPRS activation
No SIM card installed/No GSM signal
WIRELESS HOME ALARM
www.elmic.pl,