- ページ 15

ミシン Duerkopp Adler 577-1111のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Duerkopp Adler 577-1111 19 ページ。

–

Press the key Taste B.

The display will show "Pos 0 together with a circular symbol.

–

Turn the handwheel in the direction of rotation ( see the arrow on

the belt guad ) until the displayed symbol disappears and he

position Position 0 ( reference position ) is reached.

–

Press the key "E".

The reference positin will be accepted and the display will show

the parameter - 171".

–

Repeat the setting process ( Parameter "F - 170" ), if

the reference position has not been memorisd and the display

shows the error message "in A3".

Quit the correction mode

–

Press the key "P" two times.

The sewing basket will be lifted.

Memorise the setting

–

Lower the pedal forwards and release a complete sewing cycle.

The control will memorise he new setting.

Control the setting

–

When turning back via the Position 0 (reference position ), it is

necessary to lower the sewing basket ( see the Service

Instructions ).

NOTE !

The setting will be lost if no complete sewing cycle has been

performed before switching off the main switch!