- ページ 11

ミシン Duerkopp Adler 743-221のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Duerkopp Adler 743-221 12 ページ。

6. Lubrication

For filling the oil reservoir use only ESSO SP-NK 10 lubricating oil or

an equivalent oil with the following specification:

–

Viscosity at 40 °C:

–

Flash point:

ESSO SP-NK 10 lubricating oil is available from

DÜRKOPP ADLER AG sales offices:

2 liter container

5 liter container

Caution Risk of Injury !

Oil can cause skin rashes.

Avoid longer skin contact.

Wash yourself thoroughly after contact.

ATTENTION !

The handling and disposal of mineral oils are subject to legal

constraints.

Deliver used oil to an authorized reception point.

Protect your environment.

Take care not to spill any oil.

Hook lubrication

–

Tilt the machine head up.

–

Fill the oil reservoir 1 up to the "Max" mark with oil.

–

The required oil feed was set at screw 3 at the factory.

The oil feed should only be decreased or increased in special

cases.

Machine head lubrication

–

Fill the oil reservoir 2 up to the "Max" mark with oil.

10 mm

150 °C

0570 001699

0990 470058