- ページ 3

配管製品 Anzzi SB-AZ009WCのPDF インストール&オペレーションマニュアルをオンラインで閲覧またはダウンロードできます。Anzzi SB-AZ009WC 14 ページ。 Shower base
Anzzi SB-AZ009WC にも: インストレーション&ケアマニュアル (8 ページ)

Anzzi SB-AZ009WC インストール&オペレーションマニュアル
INSTALLATION GUIDE
BEFORE YOU BEGIN
Prior to installation, examine all boxes and packages for shipping damage. If the unit has been
damaged, has a finishing defect, or has missing parts, please contact our customer support
department within 5 business days of the delivery date. Please note that we will not replace any
damaged products or missing parts free of charge after 10 business days or if the product has
been installed.
These instructions include suggestions for rough construction and plumbing installation. Local
building codes vary and could supersede those suggestions. If you are not confident in your
ability to perform these tasks, contract out those tasks you need help with or use a professional
installer.
Failure to read these instructions prior to installation may result in personal injury, property
damage, or product failure. Manufacturer assumes no responsibility for product failure due to
improper installation.
Confirm that your model will fit in intended location and plumbing fixtures are located where
required before beginning installation. Do not install in areas where temperature may drop
below 32ºF (0ºC).
Walls and sub-floor must be solid, plumb, and square.
Use drop cloth to protect shower base from damage during installation.
Allow product to reach room temperature for 30 minutes before installation.
Drain cutout 5" diameter max.
IF INSTALLING MATCHING ENCLOSURE, refer to Enclosure Installation Manual for specific
lumber sizes and placement. Additional studs will be required and need to be installed at this
point.
Check the corresponding specification drawings for the detail dimensions.
Do not use plumber's putty. May result in product failure. Use latex/acrylic sealant or a gasket.
IMPORTANT: Dimensions provided are for reference only. You must measure the actual
shower tray sizes before installation, this includes overall dimensions and drain location.
1