- ページ 12

配管製品 Anzzi SB-AZ013WLのPDF インストール＆オペレーションマニュアルをオンラインで閲覧またはダウンロードできます。Anzzi SB-AZ013WL 14 ページ。 Shower base
Anzzi SB-AZ013WL にも：インストレーション＆ケアマニュアル (8 ページ)

ページを印刷する

STEP 6

It is recommended not to stand in base

●

while securing to wall. Set base in corner

and press it into mortar.

Secure flanges to all studs with #8(1-1/2")

screws through previously drilled holes.

(Fig 6)

IMPORTANT: Gaps between flanges

and studs must be less than 1/8".

Insert shims to fill gaps if needed.

STEP 7

Allow the mortar to completely harden before applying weight to the bottom of the shower

●

tray.

Install the Drywall above the tile flanges and secure it to the studs.

●

Put the tiles (or other finishing wall material) over the drywall leaving 1/8" gap between the

●

bottom of the tile and the splash rim of the shower tray. Use caulk to fill that gap. (Fig 7)

Caulk

1/8"

gap

Base

Side View

Fig. 7

Fig. 6

Waterproof Drywall to the

top of the tile flange

Stud

Drywall

Finished wall overlaps the

dry wall and tile flange

Shim