- ページ 16
コントロールパネル Duevi DVT-LCDのPDF 設置および使用マニュアルをオンラインで閲覧またはダウンロードできます。Duevi DVT-LCD 20 ページ。
ページを印刷する
ARM and DISARM
ARM and DISARM
ARM and DISARM
ARM and DISARM
Arm
To arm the system there are two ways, depending on the setting of the
arming
arming
arming
arming
(see programming via software):
•
User n° 25 enabled
Press one of the arming keys enabled for the user n° 25 ("F1 F1 F1 F1", ..., "F4 F4 F4 F4"): the panel starts
immediately the arming procedure
•
User n° 25 disabled
Press one of the arming keys ("F1 F1 F1 F1", ..., "F4 F4 F4 F4") followed by a valid user code: the panel starts the
arming procedure
Disarm
To disarm the system:
•
Press the "#" key
•
Digit the user code
The panel will disarm the system.
Coercion
This function allow to send a silent alarm signal (tele-alarm) when the user has to disarm the system
under threat.
How to use this function:
•
Each normal disarming: after the disarm command to the system press one of the directional
keys on the keyboard within the "coercion time" programmed.
•
In case of threat: after the disarm commando to the system DO NOT press any directional
key, leave the "coercion time" to end. When the "coercion time" is finished will start a "tele-
alarm" silent call
special u u u u ser
special
special
special
ser n° 25
ser
ser
n° 25 for quick
n° 25
n° 25
for quick
for quick
for quick
Quick arming
Quick arming enabled
enabled (u (u (u (user
ser 25
25 enabled
enabled) ) ) )
Quick arming
Quick arming
enabled
enabled
ser
ser
25 25
enabled
enabled
F1 F1 F1 F1
TOTAL arming
F2 F2 F2 F2
PARTIAL 1 arming
F3 F3 F3 F3
PARTIAL 2 arming
F4 F4 F4 F4
PARTIAL 3 arming
Quick arming
Quick arming disa
disabled
bled (u (u (u (user
ser 25 disabl
25 disabled
Quick arming
Quick arming
disa
disa
bled
bled
ser
ser
25 disabl
25 disabl
F1 F1 F1 F1 + User Code
TOTAL arming
F2 F2 F2 F2 + User Code
PARTIAL 1 arming
F3 F3 F3 F3 + User Code
PARTIAL 2 arming
F4 F4 F4 F4 + User Code
PARTIAL 3 arming
Dis
Dis
Dis
Disarming
arming
arming
arming
# + User Code
Disarming
ed) ) ) )
ed ed