- ページ 17

ウォーターヒーター Anzzi Envo WH-AZ011-M3のPDF インストール＆オペレーションマニュアルをオンラインで閲覧またはダウンロードできます。Anzzi Envo WH-AZ011-M3 20 ページ。 Electric instant water heater

INSTALLATION

Circuit Breaker #1

BLACK

RED

WH-AZ011-M3(11KW) requires

1 breaker and 1 set of wires.

WH-AZ015-M3(15KW), WH-AZ018-M3(18KW)

requires 2 sets of breakers and wires.

WH-AZ021-M3(21KW), WH-AZ024-M3(24KW), WH-AZ027-M3(27KW) requires 3 sets

of breakers and wires.

Make sure the connection between the appliance and the breakers are correct.

Slide the panel from the top of the heater and push back to it's position. Secure the panel

with screws from the bottom.

ATTENTION

1.Make sure that the breaker is switched OFF before installing the wire to

avoid any danger of electric shock. All mounting and plumbing must be

completed before proceeding with electrical connection.

2.The heater must be connected to its own independent electrical circuit.

Install a fuse box or switch ("breaker") for exclusive use of the heater.

3.All unit must be connected to a properly grounded dedicated branch

circuit with proper voltage rating.

Circuit Breaker #2

L2'

L1'

BLACK

RED

Circuit Breaker #3

L2''

L1''

BLACK

RED

PG.13