- ページ 5

テント Dancover Garage tent 3,77x7,3x3,24m PVCのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dancover Garage tent 3,77x7,3x3,24m PVC 7 ページ。

No.18

N0.19

No.20

No.21

No.22

N0.23

1. Assembly of middle arches

a) Take one arch (no. 4); assemble with one main corner arch

(No.7) on the left side.

b) Take the other corner arch (no.7) on the right side.

c) Take one completed arch; put screw 1-3/4" (No.18) through

holes on the right side and attach bar ( no.5) over screw and

tighten wing nut(No.20)

d) Repeat same procedures on the left side.

2. Repeat step 1 for the remaining middle arches.

3. Assembly of end arches (Wing nuts are always on inside of

the shelter)

a) Take one arch (No.4); assemble with one end corner arch

(No.3) on the left side.

b) Take one complete arch ,put 1 3/4" screw through holes on the

right side and attach bar (no.5 ) over screw and tighten wing

nut

c)Slide the hooks (No.16) over bars(No.10) then put other

side(No.9) attach one end to arch (No.3)with 1 3/4" screws and

wing nut.

d) Take the other corner arch (No.3) on the right side.

d) Repeat step 3 with the remaining arch.

g) Place one of the last arches assembled at the front of the

shelter, the other at the back.

4. Assembly of legs

a) Insert (No.1) legs into an end arch one side at a time.

b) Insert (No.2) legs to the second arch.

c) Add second arch to assembly connecting (No.8) into (No.11)

with screw 3" (No.21 )and diagonal bar (No.6) with screws 2 ½"

(No.21) with wing nuts (No.20). See sketch at front page. Note:

(No.11) should be placed at last section.

d) Repeat step b) and c) until the whole shelter is completed.

1-3/4" Bolt

2-1/2" Bolt

Wing Nut

3"Bolot

Roof

Endwall

143-3/4