- ページ 11
目覚まし時計 Dugena 4460606のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dugena 4460606 15 ページ。 Radio-controlled analog alarm clock
10. Setting the alarm time
To set the alarm time you require, turn the adjusting knob (2) on the
back side of the alarm clock in the direction indicated by the arrow.
11. Alarm ON/OFF switch
Move on/off button to start alarm ON or OFF function.
The total alarm time duration is 30-45 minutes.
12. Light & snooze function
Press LIGHT & SNOOZE button (4) to turn on the LIGHT function
at any time.
A: When the alarm sound starts, press LIGHT &
SNOOZE button (4) to turn on the LIGHT & SNOOZE
function, The alarm sound will stop and repeat
after about 5 minutes (SNOOZE function),
B: The alarm sound is last for 2 minutes, After 2
minutes, the alarm sound will stop and enter to
SNOOZE function automatically. The entire
automatie snooze function will repeat after alarm
for 2 minutes until the total alarm time duration
about 30-60 minutes is finished,
20
13. Changing the battery
1. Remove the spent battery.
2. When the battery is removed, all of the radio-controlled alarm
clocks settings are lost.
3. Insert a 1.5 V LR6, Alkali Mangan (Mignon) battery according to
the polarity marking (+/–) in the battery compartment.
Note:
Please follow the battery regulations.
Spent batteries must not be disposed of in household
rubbish. Please hand spent batteries to your local dea-
ler, a public hazardous waste site or battery collection
point. Never open, short-circuit or throw spent batteries
into the fire. Please use a new 1.5 V LR6, Alkali Mangan (Mignon) If
you do not comply with these regulations, batteries may be dischar-
ged via their phase-to-earth voltage, resulting in a risk of leakage.
Should the batteries in your clock leak, remove them immediately
to prevent damage to the clock. Avoid contact with skin, eyes and
mucous membranes. On contact with battery acid, rinse the affected
area thoroughly with water and/or seek medical advice.
Keep batteries out of the reach of children.
21