ページを印刷するHelpful Hints
- Some parts of the iron may have residual oil from the manufacturing process and
may smoke slightly on the first use. Always test the iron before use on an old piece
of fabric to ensure that the sole plate is clean.
- Stubborn creases may be removed by using an additional burst of steam or by
using the water spray feature (press their respective buttons).
- This iron is suitable for use with tap water. If the water in your area is particularly
hard then it is advisable to use distilled or demineralized water.
- The steam function can only be used at the higher ironing temperatures.
Refilling the Stream Iron
- Stand the iron in the upright position (resting on its heel), switch off, unplug and
allow to cool slightly.
- Place the iron onto the sole plate and using the measuring beaker provided, fill the
reservoir through the filling aperture. Do not overfill or exceed the MAX water level
marked on the water reservoir.
- Stand the iron in the upright position, plug in, switch on and allow the iron to come
back up to temperature before selecting the steam setting.
Ironing Temperature Guide
Instructions on
textile label
Fibre type
Synthetic
(eg Acrylic, Acetate, Viscose
(Rayon) Polyamide (Nylon), Polyester)
Silk
Wool
Cotton
Linen
Temp
Steam
control
control
No steam
No steam
MAX
Steam
Do not iron
5