- ページ 7

ターンテーブル DANFI AUDIO TE-012のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DANFI AUDIO TE-012 13 ページ。 Suitcase style turntable

ページを印刷する

4. Note: If you are playing a 45 RPM Single (small size record), place the supplied 45 RPM adapter

the center spindle then place the record on it.

5. Slide the speed selector

Set the auto stop control

end of the record. If the switch is set to OFF , the turntable will continue turning at the end of the

record.

7. Turn on the Power Switch

the display

will show "-Pho" take note the switch also controls the volume.

8. Raise the Lever

Release the Lever

9. When the record has stopped playing, the turntable will stop automatically if the Auto stop switch is in

the 'ON' position. If the Auto stop switch is set to the "OFF' position, the turntable will continue

turning at the end of the record.

10. Raise the Lever

Release the Lever then lock the Tone Arm on the Holder.

Bluetooth function

(lift up the tone arm and put it on the Tone Arm Holder position)

For first time use or re-pairing to a new BT Device, pairing it as below:

 Turn on the Power Switch

display

will show " bt" .

Note: The display

 Turn on the Bluetooth function of your device and enable the search or scan feature to find the

Bluetooth pairing name "TE-012". (See your device's instructions to add or setup a Bluetooth device)

Select "TE-012" from the device list when it appears on your device screen. If required, enter the pass

code "0000" to pair (link) with your device.

 It will sound a 'beep' if connected successful, then you can play music from your Bluetooth device.

 Press the Button

 Press button

 Adjust volume by volume control

Normal operation after paired:

 Turn on the Power Switch

display

will show " bt" .

 Wait a few seconds until the unit has auto paired to the external BT Device.

 It will sound a 'beep' if connected successful, then Plays the music in the paired BT Device as usual.

During playback, using the control buttons on the paired cell phone to skip the tracks; pause; play...etc.



to 33 45 or 78 to match the play speed of the record.

to ON if you want the turntable to stop turning when it has reached the

to on position, which will go to the phono mode position automatically,

to raise the Tone Arm then move it to the top of the desired location of the record.

to put the Tone Arm onto the record. Playing will start automatically.

to raise the Tone Arm then put it back to the Tone Arm Holder position

, then press " M" button

will show "-Lod" when it is connecting .

to select the previous or next track.

to pause and play music.

or by your Bluetooth device.

, then press " M" button

till it enters into the Bluetooth mode. The

till it enters into Bluetooth mode. The