- ページ 9

ターンテーブル DANFI AUDIO TE-2030のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DANFI AUDIO TE-2030 10 ページ。 3-speed vintage record player

Troubleshooting

There is no power

• Contact the seller for help

• Power adapter is not connected correctly.

• No power at the power outlet.

• Use the wrong adapter instead of he original one included.

• Power button is not turned on, turn the volume/ON/OFF button clockwise to turn on.

My record is skipping.

• The needle is not in the middle of the stylus or broken, replace it.

• Use the tone arm lift raise up and down the arm for 10 times before initial spinning.

• Change vinyl records or clean the vinyl records grooves properly.

• Put the record player on the flat surface with 4 legs/corners on the ground.

• The white stylus protector is till on.

• Contact the seller for help

Power is on, but the platter does not turn

• Move the lever and check if the platter moves, if it is not, Turntable drive belt has

slipped off. Contact the seller for help.

• An aux in cable is plugged into the aux in jack, unplug it.

• Contact the seller for help

Turntable is spinning, but no sound, or not loud enough

Volume is too low, turn it clockwise to volume up. Adjust the BASS



Stylus protector is still on.



Volume is not loud enough or not good to you: Adjust the BASS or connect to the external



powered speakers.

Contact the seller for help



The arm lifter can not be used to lower the arm down

Check if user has raised the lift lever up without unlocking the buckle of the stylus.



Pull the tone arm lift lever towards oneself with some strength till pull it down to the front.



Contact the seller for help

