- ページ 9

コントローラー Danfoss 4033のPDF 設置および使用説明書をオンラインで閲覧またはダウンロードできます。Danfoss 4033 12 ページ。 Electro-mechanical programmer for controlling heating & hot water

Still holding the central knob, move the blue tappet

marked 'B' to the time you want your HEATING/HOT

WATER to switch off in the morning.

You can set your other two tappets in the same way

to set your HEATING/HOT WATER for the afternoon

or evening.

EXAMPLE

(NB. Clock is in 24 hour mode)

If you want your heating and hot water ON between

7am and 10am and ON again between 5pm and

11pm, set tappets as follows:

Setting the Clock

Turn the dial clockwise

until the correct time

is lined up with the dot

labelled TIME

NB. clock is in 24 hour

mode

REMEMBER

You will have to reset the time after a power

cut and also when the clocks change in

Spring and Autumn

A at 1st ON time = 7

B at 1st OFF time = 10

C at 2nd ON time = 17

D at 2nd OFF time = 23