- ページ 10

ウォーター・ディスペンサー Airwater BaltikのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Airwater Baltik 11 ページ。

ページを印刷する

1. Troubleshooting

LIMITED WARRANTY - NORDIK

First year:

During the 1st year after the original

Concepts shall replace or repair (manufacturer's option) any part or

function of the cooler that proves to be inoperative or defective due

to a defect in material or workmanship. Labor costs are the respon-

sibility of the Manufacturer. The original sales slip (invoice) with the

corresponding serial number must support the claim.

Second year

through third

year:

Within the second through third year, Thermo Concepts will replace

or repair (manufacturer's option) the sealed refrigeration cycle in

case of defect in material or workmanship. The Manufacturer will

provide the parts and labor, through its approved service center or

the factory repair department. The sealed refrigeration cycle does

not include the electrical parts such as the relay, the overload, the

cold-water thermostat, the switch, the hot water thermostat and the

hot overload.

In addition to the sealed refrigeration system, if parts such as hot

water thermostat, compressor relay, overload, cold water thermo-

stat, internal wiring, cord set, become inoperative due to a defect in

material or workmanship, the Manufacturer will replace them

through an approved service center or the factory repair center. The

labor cost to change any of these parts in this paragraph will be the

responsibility of the end user (owner).

Transportation or any other type of compensation is not included.

General

provisions and exclusions:

Warranty will be void unless work is performed by an approved service center or the facto-

ry service center.

The original sales slip with the corresponding serial number must support every claim.

Warranty is valid for original purchaser (user) only and may not be transferred.

The warranty does not cover performance, failure or damages of any part resulting from

external causes such as alterations, misuse or abuse, misapplication, corrosion or acts of

God.

This warranty does not apply if the affixed serial number is removed, defaced or obliterated.

The warranty is limited to the value of the cooler and it does not cover performance, failure

or damages resulting from its utilization.

purchase date, Thermo

LIMITED

WARRANTY - PACIFIK ET BALTIK

First year:

During the 1st year after the original

shall replace or repair (manufacturer's option) any part or function of

the cooler that proves to be inoperative or defective due to a defect in

material or workmanship. Labor costs are the responsibility of the

Manufacturer. The original sales slip (invoice) with the corresponding

serial number must support the claim.

Second year

through fifth year:

Within the second through fifth year, Thermo Concepts will replace or

repair (manufacturer's option) the sealed refrigeration cycle in case of

defect in material or workmanship. The Manufacturer will provide the

parts and labor, through its approved service center or the factory repair

department. The sealed refrigeration cycle does not include the electri-

cal parts such as the relay, the overload, the cold-water thermostat, the

switch, the hot water thermostat and the hot overload.

In addition to the sealed refrigeration system, if parts such as hot water

thermostat, compressor relay, overload, cold water thermostat, internal

wiring, cord set, become inoperative due to a defect in material or work-

manship, the Manufacturer will replace them through an approved

service center or the factory repair center. The labor cost to change any

of these parts in this paragraph will be the responsibility of the end user

(owner).

Transportation or any other type of compensation is not included.

This warranty does not apply to any water components that become inoperative due to lim-

ing conditions.

Only original parts can be used and they are covered by the warranty.

Shipping and handling fees shall be borne by the customer and any shipment must be done

with adequate packaging to avoid warranty cancellation.

The foregoing is in lieu of all other agreements expressed, implied or statutory and all other

obligations of liabilities of the Manufacturer. The Manufacturer does not assume or author-

ize any person to assume any obligations of liability in connection with this product. Under no

circumstance will the Manufacturer be liable for any special or consequential damages or

for any delay in the performance of this agreement due to causes beyond his control.

This warranty applies only within the limits of Canada and the United States. However, a num-

ber of foreign distributors benefit from an official certification from the Manufacturer, which

covers this warranty. Please contact your local distributor for further details.

purchase date, Thermo Concepts