- ページ 12

リモコン AODELAN WTR-2RのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AODELAN WTR-2R 19 ページ。 Wireless timer remote shutter release

Using the Timer

Aodelan WTR-2 or TRS-1 has two modes:

Shutter release modes and Timer mode.

Note: The Wireless Signal Strength Indicator is not

available on TRS-1's LCD.

Changing modes on WTR-2(T) or TRS-1

Press the Sound/Mode Button to cycle between modes.

A small indicator line will appear on the LCD over the

selection. The modes are:

S: Shutter Release. A half-press of the Shutter Button

will focus; a full press will open the shutter. The LED

on the Timer and Receiver will light green when focus

is achieved.

C: Continuous. A half-press of the Shutter Button will

focus; a full press will open the shutter and take 5

photos.

[ Note ]

will light red as the images are recorded. Holding

the Shutter Button will result in more photos being

recorded, in groups of 5.

Note: Some cameras will only continuously take 3

photos rather than 5, depending on the camera .

• 10 •

[ Note ]

The LED on the Timer and Receiver

[ Note ]