ページを印刷する
INSTRUCTION MANUAL: DHP7
OPERATING INSTRUCTIONS (continued)
STARTING
PRESS
SETTING
CONTROL
PANEL
Dulytek Equipment
www.dulytek.com
1. Flip the ON / OFF switch
and the switch become lit.
You can set the press temperature and timer using the control panel
Please follow the steps below to record the desired settings.
1. Press SET button on the control panel (Figure 1) to go to the
temperature setting mode. You should now see "P - 1" on the display
(Figure 2).
2. Press UP or DOWN button to select the desired temperature (Figure 3).
Tip: Enter the temperature either in °F or °C; you will be able to select the
temperature scale later.
Figure 1
3. Press SET button again (Figure 4) to go to the timer settings mode. Now,
you should see "P - 2" on the display (Figure 5).
4. Press UP or DOWN button to select the desired time in seconds (Figure
6).
Figure 4
Email: [email protected]
I
to turn the press on. The control panel
E
Figure 2
Figure 5
© 2018 Dulytek
All rights reserved
Figure 3
Figure 6
PAGE 8
E
.
E