- ページ 9

防犯カメラ Abus Eyseo TV7223のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Abus Eyseo TV7223 20 ページ。 Progressive scan ccd network camera

Access to the network camera via the Internet Explorer

When delivered, no administrator password is defined for the network camera.

The network camera asks for this number at the start of operation. For security reasons, the

administrator should define a new password immediately. After the new administrator password is

stored, the network camera asks for the user name and password every time it is accessed. The

administrator can define up to twenty (20) user accounts. Every user has access to the network

camera, but not to the system configuration. Some system-critical functions are reserved for the

administrator, such as system configuration, user administration and upgrading software programs.

The administrator's user name is always root and cannot be changed. Following a password change,

the browser displays an authentication window and asks for the new password. After changing the

password, you cannot restore the original administrator password. Your only option is to reset all

default factory settings/parameters.

To enter a password:

Open the Internet Explorer and enter the IP address of the camera (e.g.: <http://192.168.0.99>).

You are prompted for authentication:

You are now connected with the network camera and can see a video stream.

Note: It may happen that your PC's security settings prevent a video stream. You can

change the security settings to a lower level under "Tools/Internet Options/Security". Make sure

you enable Active X Control Elements and Downloads.