- ページ 6

スピーカー 3SIXT SoundBrickのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。3SIXT SoundBrick 13 ページ。

3) If your device asks for a pairing code, please enter '0000'

and confirm it.

4) After successful pairing, the SoundBrick will make a sound

and the LED light (5) stays blue.

Note: Pairing time varies with different devices. The SoundBrick

only needs to be paired the first time and it will automatically

connect when the device is back in range or is turned back on

(the SoundBrick remembers the last 8 paired devices' names).

AUX AUDIO-IN CONNECTOR

The SoundBrick also features 1 x AUX audio-in port (7). Simply

connect the SoundBrick with your device via the 3.5mm jack

audio cable. The green indicator light (5) will illuminate. Now

you are ready to play music via the wired AUX connection.

LOW POWER INDICATOR

The SoundBrick will make a voice prompt to remind you to

charge if the battery is low (battery <10%). You will need to

charge the SoundBrick regularly to maintain a full charge.

CHARGING AND COMPUTER CONNECTION

Connect the Micro USB Charge Cable to a USB 5V 1A charger

to recharge the SoundBrick's internal battery via the Micro

USB port (6). Whilst charging, the LED light will illuminate Red.

Once Charging is complete the red LED light (5) will turn off.

This indicates that the SoundBrick is fully charged and ready

for use.