- ページ 6

ヘッドフォン 3SIXT 3S-0954のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。3SIXT 3S-0954 12 ページ。 Studio true wireless earbuds with wireless technology

PAIRING TO MOBILE PHONES/TABLETS/COMPUTERS

After the Earbuds are connected to each other, you will hear the voice

prompt "Paring, " this means that the Earbuds are in pairing mode, and

are discoverable as a Bluetooth® device.

Activating Bluetooth® on your device:

1) Go to your device Bluetooth® settings and scan for new

Bluetooth® devices;

2) Search for 3SIXT 3S-0954 and once found, click on it to pair with

3SIXT Studio True Wireless Earbuds;

3) If your device asks for a pairing code, please enter '0000' and

confirm it;

4) You will hear the voice prompt "Second device connected" this

indicates both earbuds successfully connected to your device and

are ready to go.

LOW POWER WARNING

3SIXT Studio True Wireless Earbuds will make a voice prompt to remind

you to charge if the battery is low (battery <10%). You will need to charge

the Earbuds regularly to maintain a full charge.

The charging case has built in 500mAh battery. When the Earbuds

power is low insert them into the charging case to recharge them.

The Blue LED light on the case (8) will illuminate:

Solid blue light: 100%, Three blue flashes: 75% Two blue flashes: 50%,

One blue flash: 25% (or below).

CHARGING THE CASE

Connect the Micro USB Charge Cable to a USB 5V 1A charger to

recharge the Earbuds charge case internal battery via the Micro

USB port (9). When the Earbuds are removed from the case the Blue

LED light will blink once to indicate the Charge Case battery is low. In

normal conditions you can expect about 5 full Earbuds charges from

a fully charged case.