- ページ 7

DCドライブ Danfoss VLT 5000 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Danfoss VLT 5000 Series 12 ページ。 Frequency converter wobble function
Danfoss VLT 5000 Series にも：導入マニュアル (9 ページ), インストラクション (4 ページ), 取扱説明書 (16 ページ)

ページを印刷する

Supply voltages:

The option card is supplied by the internal 24 V DC

supply of VLT 5000, but as the available power is

limited it can be necessary to use an external 24 V

DC supply.

The 24 V DC supply of VLT 5000 can supply a total

of 420 mA including the load on the control card

(terminal 12, 13 and output 42 and 45).

The 5 V output on the option card is generated from

the 24 V supply. The maximum power on the 5 V

side is 5 V * 280 mA = 1.4 W, this corresponds to

app. 60 mA on the 24 V side.

When an external 24 V DC voltage source is used

the internal 24 V supply from the control card must

be disconnected, this is done by opening switch 1.1

and 1.5.

MD.50.B2.02 – VLT is a registered Danfoss trade mark

VLT

5000 SyncPos option

Each digital input on the option card takes 8 mA.

Each digital output on the option card can supply up

to 0.7 A (external 24V-supply) depending on the

load.

The load from the 24 V supply (internal or external)

can be calculated as follows:

8 mA * number of digital inputs

Load on digital outputs

(mk3 C, O1 – O8)

load on 5 V supply

(mk3 B/D, 5 V/com)

Load on control card

(24 V supply, terminal 12/13 and

outputs, terminal 42/45)