ページを印刷するOPERATING YOUR REFRIGERATOR
HOW TO USE THE CONTROL BUTTON:
CARE AND MAINTENANCE
CLEANING YOUR REFRIGERATOR
MOVING YOUR REFRIGERATOR
• It is recommended that you installed the refrigerator in a place where the
ambient temperature is between 10-26 °C(50-80 °F) .If the ambient temperature
is above or below recommended temperatures, the performance of the unit may
be affected. For example, placing in extreme cold or hot conditions may cause
interior temperature to fluctuate. The range of set temperature (see Technical
data) may not be reached.
• The temperature may fluctuate depending on whether or not the interior light is
on or off or whether the bottles are located on the upper, middle or lower section.
• You can set the temperature to around 18, 15, 10 Celsius by choosing "H", "M",
"L" position..
•
• You can turn off the unit by choosing the position "OFF"
• You can switch on/off (1=on, 0=off) the light using the light button.
• Unplug the refrigerator and remove the bottles.
• Wash the inside with a warm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a quart of water.
• Outside of refrigerator should be cleaned with mild detergent and water.
• Draw out the water box at the bottom, and wash.
• Clean the fans by hoover regularly! Dirty fans reduce the cooling performance
and decrease fan lifetime.
• Remove all the bottles. and securely tape down all loose items inside your
refrigerator.
• Turn the leveling legs up to the base to avoid damage.
• Be sure the refrigerates stays in the upright position during transportation.
INSTRUCTION MANUAL
7