- ページ 4
ミュージックペダル Duncan Vise GripのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Duncan Vise Grip 12 ページ。 Compressor pedal
ページを印刷する
Volume – Always important, this knob can
5
be used to achieve the desired level
balance between the sound though the
compressor and the bypassed sound.
Balance this with the sustain knob to
provide as natural an effect as possible.
Alternatively, to use the Vise Grip as a
clean boost, set the output to a higher
setting and lower the amount of sustain.
Status LED – Indicates when the Vise Grip
6
Compressor is active. LED is on when the
unit is engaged, off when in true bypass
mode.
True Bypass Footswitch – Removes the
7
circuit from your guitar's signal via a
hardwired connection from the input jack
to the output jack.
Input Jack – Plug in your guitar
8
or other pedal cable here.
Output Jack – Run a cable to
9
the input of your amp or to the
next effect in your chain.
Power Jack – We designed this pedal to be
10
convenient. You can use any 9Vdc regulated
adapter (negative polarity center terminal).
Easy Access Battery Door – When pedal is
11
not in use, save your battery life by removing
your guitar cable from the input jack.