- ページ 5

冷凍庫 Dune 4WD 95L Dual ZoneのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Dune 4WD 95L Dual Zone 11 ページ。

ページを印刷する

Dune 4WD Fridge/Freezer

3. Operating Instructions

Control Panel – Single Zone

Control Panel – Dual Zone

NOTE:

• The temperature displayed on the control panel at start-up is the current internal

temperature of your Dune 4WD Fridge/Freezer unit. This will appear as a

continuous, non-ﬂashing icon. Enter the settings mode (see below 'Settings Mode')

to set compartment temperatures. In this mode, the set temperature for a given

compartment will appear as a ﬂashing icon.

3. Operating Instructions

Dune 4WD Fridge/Freezer

Your control panel settings are stored in the control panel system memory. If you

•

suddenly lose power or disconnect your fridge from the power source, your

temperature and other settings will automatically restore.

•

The voltage display is used to monitor the DC voltage at the device input. This can

be used to aid selection of an appropriate battery protection level when the device

is powered by a battery. When the unit is powered by 220-240V AC, the voltage

display on the control panel will disappear.

Powering on/o the unit

•

Plug in either the AC or DC power cable supplied with your unit.

•

Hold the

button for 3 seconds to turn the unit on.

•

Hold the

button for 3 seconds to turn the unit off.

Settings Mode

•

Press the

button to enter the settings mode.

•

Cycle through the different setting options by pressing the

•

ed.

•

anything – after 3 seconds, the control panel will exit the settings mode

and return to its regular display state.

Set the temperature

•

For the single zone: press the

•

Press the

button to increase or decrease the compartment

temperature respectively.

•

NOTE: For the dual zone, press the

pressor compartment temperature.

•

NOTE: Temperature range is -22°C to +10°C.

•

NOTE: Temperature setting in step of 1°C.

3. Operating Instructions

button.

button to enter the settings mode.

button again to adjust the com-