ページを印刷するTELEMEMO MODE
The Telememo Mode lets you store up to 10 records,
Text area
each with a name (up to 8 characters) and a phone
Mode indicator
number (up to 12 digits). You can recall records by
scrolling through them on the display.
• The record on the display when you exit the Telememo
Mode appears first the next time you enter the
Telememo Mode.
To input a new Telememo record
1. In the Telememo Mode, use C to display the number
of the record where you want to input data.
2. Hold down A and a cursor appears on the text area.
Record number
Number area
3. Use C to scroll through characters at the current cursor position. Characters scroll
in the sequence shown below.
(Space)
A to Z
• Holding down C scrolls at high speed.
4. When the character you want is at the current cursor position, press B to move the
cursor to the right.
5. Repeat the steps 3 and 4 to input the rest of the characters.
• You can input up to eight characters for the name, though only three characters
are visible at a time. If the name you input has fewer than eight characters, use
B to move the cursor to the eighth space (which means you would press B
three times after inputting a five-character name).
6. After you input the name, use B to move the cursor to the number area. Hold
down B to move the cursor at high speed.
• Pressing B while the cursor is located at the eighth character of the text area
advances to the number area. Pressing B while the cursor is located at the 12th
digit of the number area returns to the text area.
7. Use C to scroll through characters (hyphen, numbers, space) at the current cursor
position on the number area. Characters scroll in the sequence shown below.
0 to 9
• Holding down C scrolls characters at high speed.
• You can input up to 12 digits for the number.
8. After inputting the name and number of the record, press A to store it and exit the
setting screen.
• The display can show only three name characters at a time. Longer names scrolls
continuously from right to left. The symbol " " indicates that the character to the
left is the last, and the character to the right is the first.
• The number display alternates between the first six digits and the last six digits.
To recall Telememo data
In the Telememo Mode, press C to scroll forward through the stored data items.
To edit Telememo data items
1. In the Telememo Mode, use C to display the number of the record you want to
edit.
2. Hold down A until the cursor appears in the display.
3. Use B to move the cursor to the character you want to change.
• Hold down B to move the cursor at high speed.
4. Use C to change the character.
• Holding down C scrolls characters at high speed.
• See step 3 of "To input a new Telememo record" for information on inputting
name characters, and step 7 for inputting number characters.
5. After making the changes that you want, press A to store them and exit the setting
screen.
To delete a Telememo record
1. In the Telememo Mode, use C to display the number of the record you want to
delete.
2. Hold down A until the cursor appears in the display.
3. Press C and L at the same time. The message "CLR" appears in the display,
indicating that the record was deleted.
• After the record is deleted, the cursor appears in the text area, ready for input.
4. Input a new record or press A to exit the setting screen.
0 to 9
(Space)
ALARM MODE
When the Daily Alarm is turned on, the alarm sounds for
AM indicator
20 seconds at the preset time each day.
Hour : Minutes
Press any button to stop the alarm after it starts to sound.
Mode indicator
When the Hourly Time Signal is turned on, the watch
beeps every hour on the hour.
Alarm on indicator
Hourly time signal on indicator
To set the alarm time
1. Hold down A until the hour digits start to flash on the
display, indicating the setting screen.
• At this time, the alarm is turned on automatically.
2. Press B to move the flashing in the sequence shown
below.
3. Press C to increase the number. Holding down C changes the setting at high
speed.
4. After you set the alarm time, press A to exit the setting screen.
• The format (12-hour and 24-hour) of the alarm time matches the format you select
in the Timekeeping Mode.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning ( ) or afternoon ( ).
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To switch the daily Alarm or the Hourly Time Signal on and off
Press C while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
Both ON
Hourly Time Signal only
To test the alarm
In the Alarm Mode, hold down C to sound the alarm.
• Holding down C to test the alarm also changes the Daily Alarm and Hourly Time
Signal on/off settings.
2246-2
Hour
Minutes
Both OFF
Daily Alarm only