見る Casio 2412のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Casio 2412 7 ページ。
ページを印刷するGetting Acquainted
Congratulations upon your selection of the CASIO Wrist Camera (this watch).
To get the most out of your purchase, be sure to read this manual carefully,
and keep the manual and everything contained in the package on hand.
About This Manual
• Button operations are indicated using the letters
shown in the illustration.
• The sizes and positions of the characters shown on
SAT 6 - 3 ‰
the sample displays in this manual may differ
P
slightly from those that actually appear on the
1‰
58
:
35
display of your watch.
• When performing operations with this watch, you
must first enter the correct mode (Camera Mode,
Timekeeping Mode, etc.) See "General Guide" for
information about maneuvering between modes.
• Each section of this manual provides you with the information you need to
perform operations in each mode. Further details and technical information
can be found in the "Reference" section.
• To ensure that this watch provides you with the years of service for which it is
designed, be sure to read and follow the instructions under "User
Maintenance".
Before Using the Watch...
To set the time and date
1.In the Timekeeping Mode, hold down A for about
one second until the seconds start to flash on the
'‰1 6 - 3 ‰
display, which indicates the setting screen.
• Use D to cycle around the setting screen in the
P
l
1‰
59
:
sequence shown below.
12
Press
Seconds
Hour
Contrast
Day
Setting
2. While a setting is flashing, use E (+) and B (–) to change it.
• Pressing E while the seconds are flashing resets them to 00. See "To
reset the seconds to zero" for more information.
• Holding down either button scrolls at high speed.
3. When everything is the way you want it, press A to exit the setting screen.
• The day of the week is set automatically in accordance with the date
setting.
• The watch's built-in full automatic calendar makes allowances for
different month lengths and leap years.
• The year can be set in the range of 2000 to 2039. Going past
December 31, 2039 reverts to January 1, 2000.
• See "To adjust the display contrast" for more information about the
contrast setting.
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press E to toggle between12-hour timekeeping
(indicated by A or P on the display), or 24-hour timekeeping.
• With the 12-hour format, the P (PM) indicator appears to the left of the hour
digits for times in the range of noon to 11:59 p.m. and the A (AM) indicator
appears to the left of the hour digits for times in the range of midnight to
11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59,
without any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode
is applied in all modes.
To adjust the display contrast
1. In the Timekeeping Mode, hold down A for about
CNT 8
one second until the seconds start to flash, which
indicates the setting screen.
2. Use D to cycle through the available settings until
the contrast adjustment screen is on the display.
• The contrast setting shows a value that indicates
the current contrast level. A setting of Level 4, for
example, is indicated as CNT4.
3. Use B (Darker) and E (Lighter) to adjust the contrast to any one of the
nine available levels.
• You can set display contrast in the range of CNT1 through CNT9. The
initial default setting is CNT5.
4. Press A to exit the setting screen.
Note
The contrast setting described above does not affect the display of images.
Image contrast can be adjusted using a separate procedure, which is
described in "To adjust image brightness".
USER'S GUIDE 2412
.
Minutes
Year
Month
Specifying the Display Color Pattern
You can select from among three color combinations patterns and two layouts
for a total of six different Timekeeping Mode color patterns.
To change the display color pattern
In the Timekeeping Mode, press B.
• Each press of B cycles through available display color patterns in the
sequence shown below.
White on blue
White on black
SAT 6 - 3 ‰
SAT 6 - 3 ‰
P
P
1‰
58
1‰
:
35
Press B.
▲
Blue on white
White on black
SAT 6 - 3 ‰
SAT 6 - 3 ‰
1‰ : 58
1‰ : 58
P
P
35
• Note that the display color pattern you make here is applied in other modes,
too.
Auto Power Save
The watch automatically turns off its display screen
if it is not moved and/or if you do not perform any
SAT 6 - 3 ‰
operation on it for about 60 minutes.
This not only conserves battery power, it also
P
1‰
58
:
protects against "burn in" of display images.
35
To turn the display back on, press F .
This displays the Timekeeping Mode screen .
Blue on white
SAT 6 - 3 ‰
P
1‰
58
:
58
:
35
35
White on blue
SAT 6 - 3 ‰
1‰ : 58
P
35
35
1