- ページ 2

見る Casio 2519のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Casio 2519 2 ページ。 Casio watch user manual
Casio 2519 にも：ユーザーマニュアル (2 ページ)

ページを印刷する

Stopwatch

The stopwatch lets you measure elapsed time, split

1/100 second

times, and two finishes.

• The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from

zero after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues

even if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a split time is

frozen on the display clears the split time and

Hours

Seconds

returns to elapsed time measurement.

• All of the operations in this section are performed in

Minutes

the Stopwatch Mode, which you enter by pressing

To measure times with the stopwatch

Elapsed time

Start

Stop

Re-start

Split time

Split

Split release

Start

(SPL displayed)

Two Finishes

Split

Stop

Start

First runner

Second runner

finishes.

Display time of

first runner.

Dual Time

The Dual Time Mode lets you keep track of time in a different time zone.

• In the Dual Time Mode, the seconds count is synchronized with the seconds

count of the Timekeeping Mode.

To set the Dual Time

1. Press C to enter the Dual Time Mode.

2. In the Dual Time Mode, hold down A until the

hour setting starts to flash, which indicates the

setting screen.

3. Press C to change the selection in the following

sequence.

Hour

Hour : Minutes Seconds

4. Press D to increase the setting.

5. Press A to exit the setting screen.

USER'S GUIDE 2519

Stop

Clear

Stop

Clear

Split release

Clear

Display time of

second runner.

Minutes

Reference

This section contains more detailed and technical information about watch

operation. It also contains important precautions and notes about the various

features and functions of this watch.

Auto return features

• If you leave a screen with flashing digits for two or three minutes without

performing any operation, the watch automatically saves any settings you

have made up to that point and exits the setting screen.

Data and Setting Scrolling

The D button is used to scroll through setting screen data on the display.

Holding down this button during a scroll operation scrolls through the data at

high speed.

Backlight Precautions

The backlight uses an LED (light-emitting diode) and a light guide panel that

cause the entire display to glow for easy reading in the dark.

In any mode, press B to illuminate the display for about one second.

• The illumination provided by the backlight may be hard to see when viewed

under direct sunlight.

• The backlight automatically stops illuminating whenever an alarm sounds.

• Frequent use of the backlight shortens the battery life.