ページを印刷するParts & Fittings for Alabama Chair (30151290) (30151381)
2
Ready?
Follow this step-by-step guide...
1
C
A
2
FL
Front Left
FL
IMPORTANT NOTE:
Make sure to correctly identify leg
frame positions. The front side of the left leg frame (2) is
marked with "FL" and right leg frame (3) is marked with
"FR".
Parts List:
1
SEAT FRAME - 1pc
2
LEFT LEG FRAME (FL) - 1pc
3
RIGHT LEG FRAME (FR) - 1pc
4
CENTRE STRETCHER - 1pc
1
3
4
C
4
3
FR
Front Right
Additional Tool Required:
CROSSHEAD SCREWDRIVER
C
4
3
A
x2
Attach and insert ends of centre stretcher (4) into
holes on left leg frame (2) and right leg frame (3) as
shown.
Place the insert nuts (C) into holes on the centre
stretcher (4).
Then align xing holes on the insert nut by turning it
using a crosshead screwdriver to be able to x bolts
(A) through holes on the legs as shown.
IMPORTANT NOTE: Fasten bolts using allen key (E) but
do not fully tighten at this stage.
2
Fittings List:
A
M6 x 50mm BOLT - 2pcs
B
M7 x 35mm BOLT - 6pcs
C
INSERT NUT - 2pcs
D
WOOD CAP - 2pcs
E
ALLEN KEY - 1pc
A
FR