- ページ 10
サーモスタット Danfoss REP24のPDF 取付・取扱説明書をオンラインで閲覧またはダウンロードできます。Danfoss REP24 12 ページ。 24v electronic dial setting thermostat with proportional output and manual heat cool selection
ページを印刷する
User Instructions
Setting the temperature
Turn setting dial to required temperature.
Frost Protection
To activate frost protection, turn the dial below 10°C. Frost
protection becomes active at 8°C. If the temperature in the
room drops below 8°C then the output will activate.
When frost protection is activated the right LED will turn
orange.
Standby Mode
In cooling mode, the standard frost protection is not available;
instead there is standby mode. When the dial is turned past
10°C the unit enters standby mode and cooling will be inactive
10
until dial is turned up past 10°C.