- ページ 9

サーモスタット Danfoss RET2000B-RF + RX1-SのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Danfoss RET2000B-RF + RX1-S 12 ページ。 Electronic digital rf thermostat with lcd

Thermostat status (cool mode only)

A snowfl ake symbol will be lit whenever the thermostat is calling

for cooling. If this is seen to fl ash, the thermostat output is

delayed for a short period to prevent compressor damage.

Thermostat standby

To place the thermostat into standby (off ), press the V arrow

twice to enter the temperature setting mode. When in heating

mode press and hold the V arrow until the set temperature

disappears and the standby symbol appears. In cooling mode

press and hold the Λ arrow until the standby symbol appears.

When in standby the thermostat will have no control of the

heating or cooling system.

To exit standby press and hold the Λ arrow (V arrow in cooling

mode) until the required set temperature is fl ashing on the

display.

Danfoss Heating