ページを印刷する
E. Running your Programme
Your 103E5 controls your hot water and central heating together, turning them on
and off at the same time.
To run the central heating and hot water programme press the SELECT button.
As you press the SELECT button the display will change between ON, OFF, ALLDAY
and AUTO. Select the option you require depending on your circumstances, time of
the year etc (Fig. 7).
•
AUTO = the heating and hot water come on and go off at the programmed
times
•
ON = the heating and hot water will remain on constantly
•
OFF = the heating and hot water will not come on
•
ALLDAY = the clock will turn the heating and hot water on at the first programmed
ON and will leave it on until your last programmed OFF.
F. Temporary User Overrides
Sometimes you may need to change the way you use your timeswitch temporarily, i.e
due to unusually cold weather.
The 103E5 has two convenient overrides which can be selected without affecting the
set programme. (Fig. 8)
+1HOUR
o Press the +1HOUR button once if you need an extra hour of operation.
I f the system is off it will come on for an hour. If it is already on it will add an extra hour
so the system stays on for an extra hour.
To cancel the override press +1HOUR again.
ADVANCE (only during AUTO mode)
o Press the ADVANCE button once to advance to the next programmed event.
If the system is on it will go off. If it is off it will come on. The set programme will
resume at the next programmed ON/OFF time.
To cancel the override press ADVANCE again.
Danfoss Randall Ltd
Ampthill Road
Bedford, MK42 9ER
Tel: 0845 1217 400
Fax: 0845 1217 515
Email: [email protected]
Website: www.danfoss-randall.co.uk
Fig. 7
+
Fig. 8
Override
buttons
+
-
PROGRAMME
-
PROGRAMME