- ページ 4
エアコン Airwell 18のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Airwell 18 11 ページ。 Had/jad/dha wall mounted range dc inverter
ページを印刷するAir intake grill
Air filter
Air purifying filter
Horizontal Louver
Vertical Louver
Bipolar Ionizer (option)
On unit operation (Button/indicator)
Unit`s indicatiors
Power cord (optional)
Part names and function
A Bipolar ionizer LED
There is a flashing LED to assure
the ion output functionality.
In case that the LED is not flashing,
the cleaning pad has to be moved
once to another side and back to
the original position (close to the LED)
for cleaning.
B Bipolar ionizer cleaning pad
The cleaning pad not only have the
cleaning function, but also it can switch
the ionizer ON/OFF.
Position 1(Close to LED): ON
Position 2(Far away from LED): OFF
C Standby indicator
This indicator will light up when the unit
is on Standby. It will turn off when unit is
in operation.
D Bipolar ionizer indicator
The indicator will light up when Bi-Polar
ionizer is activated via remote control. It
will light up for about 15 seconds before
goes off. (only applicable to units fitted
with Bi-Polar Ionizer)
E Timer indicator
The indicator will light up when Timer
or Sleep operation is activated. During
this mode, upon receiving any signal
from Remote Control (RC), the light
will come up strong and deemed after
about 15 seconds.
Filter indicator
F
If the indicator light up (for about 30
seconds after display is going off), it
means that filter should be cleaned.
The indicator will light up again every
time a signal is received from RC, until
it is reset. To reset the filter indicator,
press the reset button (J) and release