コントロールユニット Danfoss VLT MCD 200のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Danfoss VLT MCD 200 6 ページ。 Usb module
Danfoss VLT MCD 200 にも：取付説明書 (17 ページ), インストレーション・インストラクション (5 ページ)

ページを印刷する

Installation Instructions

Finger Guards

VLT

Soft Starter MCD 200/MCD 500

1 Product Overview

These instructions provide information about installation of

finger guard kits. The instructions are targeted at users already

familiar with the VLT

Soft Starters MCD 500, or VLT

Starters MCD 200/202. Read the instructions before installation

and ensure that instructions for safe installation are observed.

Additional resources

Further manuals and instructions are available for download at

vlt-drives.danfoss.com/Support/Technical-Documentation/.

2 Items Supplied

The finger guard is available in different kits depending on

model and enclosure size. For a list of all available kit part

numbers, refer to chapter 4.5 Packing List.

3 Safety Instructions

Finger guards fit over the soft starter power terminals to

increase IP rating and prevent accidental contact with live

terminals.

Compact

ELECTRICAL SHOCK HAZARD

VLT

connected to mains voltage.

Models MCD5-0360C ~ MCD5-1600C: The bus bar and heat

sink are live while the unit operates (starts, runs, or stops). If

the soft starter is installed without a main contactor, the bus

bar and heat sink are live whenever mains voltage is

connected. This is also the case when the soft starter is

ready or tripped.

Improper installation of the motor or the soft starter, and

installing or servicing with power connected, can cause

death, serious injury, or equipment failure.

To avoid death, serious injury, or equipment failure:

•

WARNING

Soft Starters contain dangerous voltages when

Only use qualified electricians for carrying out the

electrical installation.

Disconnect the soft starter from all power sources

before installation or service.

Fit finger guards to all terminals, even if no cable is

connected.

Treat the bus bar and heat sink as live whenever

the unit has mains voltage connected. Also take

this precaution when the soft starter is tripped or

waiting for a command.

Follow the guidelines in these instructions and local

electrical safety codes.

MI17A602