- ページ 5

水ポンプ Danfoss APP 0.8のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Danfoss APP 0.8 12 ページ。 Disassembling and assembling

Service guide | Disassembling and Assembling, APP 0.6-1.0

13. Replace O-ring on the port flange and

position the new cylinder barrel on the

port plate.

15. Position the housing on the port flange

and over the guide pin.

17.Mount the new shaft seal following the

instructions on page

O-ring

14. Position the new spring, new spring

guide, new retaining ball, new retainer

and new pistons.

16. Hold the pump topgether and carefully

turn it over to rest on the housing. To

prevent seizing-up, lubricate the threads

on the 2 screws and screw them into the

port flange and the housing. Use Molykote

D paste from Dow Corning or Klüber UH1

84-201 from Klüber lubrication. Tighten

the 2 flange screws accordiing to exploded

view.

18. Replace the O-ring on the SAE flange.

180R9092| DKCFN.PI.013.EC5.02 | 521B0739| 5