- ページ 8

水ポンプ Danfoss APP seriesのPDF 分解と組み立ての説明をオンラインで閲覧またはダウンロードできます。Danfoss APP series 12 ページ。 Disassembling and assembling
Danfoss APP series にも：サービスマニュアル (12 ページ), サービスマニュアル (12 ページ), インストラクション (10 ページ)

ページを印刷する

Disassembling and Assembling, APP 1.5-3.5

Service guide |

8 | 180R9091 | DKCFN.PI.013.EF5.02 | 521B0741

5. Using the plastic tool provided, large

diameter first, press the seal home against

the shoulder, by hand.

7. Push the new ceramic ring into the flange

using the plastic tool provided. Make sure

the face with the rubber seal is positioned

against the shoulder in the flange.

Wet the parts with clean (filtered) soap-

water before assembly.

9. To prevent cold welding, lubricate

threads on the 4 screws with grease and

screw them into the pump and tighten

by hand. Use Molykote® D paste from Dow

Corning or Klüber UH1 84-201 from Klüber

lubrication. Tighten the 4 flange screws

according to exploded view.

6. Remove ceramic ring from the flange.

8. Position the O-ring on the seal SAE flange.