- ページ 14
自動車アクセサリー Dunlop L.CRA.17D.C.MのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dunlop L.CRA.17D.C.M 20 ページ。 Drw, double rear wheel drive and 4x4
ページを印刷する
5 .9 S PR I N G ALI GN MEN T
1.
With the vehicle standing at the desired ride height, ensure that the
springs are correctly aligned as illustrated above and then tighten
the bolts to secure the bellow to both the upper and the lower
mounting brackets.
2.
Always check if the air bellow won't touch any obstacle
3.
Be aware 4x4 uses 170/3, this are 3 steps air bellows
^ 3 steps air bellow
5 .1 0 M A I N T E N ANCE
Following installation, it is recommended that all metal parts are coated
with a protective substance such as body wax.
The system does not require very much maintenance other than...
1.
To maintain air pressure in the springs. Much like a tyre, the system
may lose a little air over time.
2.
To keep the air bellows clean. It is suggested that, when washing the
vehicle, the bellows are inspected and cleaned as necessary (pre-
ferable by spraying). Look in particular for stones or grit trapped
between convolutes, as this may damage the bellow.
3.
Check before and after the winter period the wax coating. Re-wax
when necessarily
14 | INSTALLATION MANUAL | AUXILIARY AIR SUSPENSION | VOLKSWAGEN CRAFTER DRW AND 4X4 / MAN TGE DRW AND 4X4
FEB 2021