- ページ 8

エアコン Airwell AW-WHPMA08-91のPDF インストールとセットアップをオンラインで閲覧またはダウンロードできます。Airwell AW-WHPMA08-91 15 ページ。

When the monobloc is powered up for the first time, 1-100% will be displayed on the user interface during

initialisation, in this time the controller can't be used.

The following setting must be entered into the controller these are detailed below, in order for the controller and Heat

pump to operate correctly.

Press and Hold the unlock button for 3 seconds.

Press the menu button to enter the menu

Scroll down the using the down arrow to SERVICEMAN and press OK

Enter the SERVICEMAN code 234.

Select DHW MODE SETTING

Set DHW Mode to

DISINFECT should be set

immersion is controlled by the

heat pump.

DHW PRIORITY should be set to

1.18 t_DHWHP_MAX should be set

According to the tank size:

200L - 60min

300L - 90min

All changes to selections must be confirmed with

Press BACK

Select Cool Mode

Cool Mode 2.1 should be set to

All changes to selections must be confirmed with

Press BACK

Select Heat Mode

Set T1setH1, set to 55֯ c for Rads and 45֯ c

for UFH or to the Design flow temp.

Set T1SetH2, set to 30֯ c

Set T4H1, set to the External design temp

We recommend -2֯ c or -5֯ c for Scotland

W: www.aukdistribution.com

Starting Up the Unit for the First Time

YES

if the

Yes

NON

T: 0191 516 6553

FOR SERVICEMAN

Please input the password:

3 4

ENTER

ADJUST

NON