- ページ 8

ガーデンハウス Dunster House H4-2424DBSHのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dunster House H4-2424DBSH 16 ページ。

ページを印刷する
Dunster House H4-2424DBSH インストレーション・マニュアル
STEP 2: BEARERS
Items:
8x
ST-PT35352240 (BEARER)
1x
MFP - 2240x1220x10
1x
MFP - 2240x1080x10
48x 35mm SCREWS (6/BEARER)
5x
50mm SCREWS
MFP - 2240x1220x10
Principle of floor board(s) installation
Use 35mm screws. Keep and equal distance between
screws. Use the same amount of screws per each
bearer.
Assembly Steps
Pre-drill parts before fixing with screws
MFP - 2240x1080x10
360
360
360
2300
FRONT
2a) Ensure the base is level. Space bearers at the specified
distance as shown in the the diagram below (1.0). If the bearer
layout consists of double bearers, use 50mm screws to secure them
as shown in the image to the right (1.1)
2b) Secure the MFP to the bearers with 35mm screws all equally
spaced. There should be a 70mm space between the ends of the
bearer and the screw.
ST-PT35352240
315
315
310
Approx. 70mm
Joining double bearer (1.1)
Use 50mm screws
50mm SCREW
35mm SCREW
Page 8