- ページ 10

屋外用家具 Dunster House ATLAS P5-3060PRGのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dunster House ATLAS P5-3060PRG 15 ページ。 Pergola

Panel CP1

60mm Screws

M10x110 Bolts

Step 1.

Position the Panel CP1 between the Posts as shown in the diagram below.

•

Join (2) Panel CP1 with another Panel CP1, using (5) 60mm screws.

•

Connect the two end panels to the Posts (5 screws each) and to the Beams with (2) 60mm screws per panel.

•

Please Note:

•

To fit the panel the braces has to be removed.

Please Note:

•

Fix the ends panel first and space the centre panel between them. (option to add sealant between the panel and

the post)

•

There maybe a gap between the panels, which is covered by the external and internal trims.

Assembly Steps for Atlas Pergola 6.2m x 3.2m

Full height wall panels assembly

2969

2729

M10 Shield Anchors

M10x28 Washers

60mm Screw

View from inside

•

M10x110mm

bolt &washer

M10 shield anchor

(

16 hole 80mm deep required)

** Quantity of components will vary,

depending on your purchase.

Fix the panels into the concrete base by

drilling

16 holes 80mm deep (2 per panel)

and inserting the shield anchors into the

holes.

Fix the panels by inserting M10x110mm

bolts and M10 washers and tighten until

secure.

Panel

Concrete

Page 10