- ページ 5

ネイルガン DUO-FAST DF175-CNのPDF 取扱説明書と回路図をオンラインで閲覧またはダウンロードできます。DUO-FAST DF175-CN 12 ページ。 Cap nailer

PROTECT YOUR EYES AND EARS. WEAR ANSI Z87.1 SAFETY

GLASSES WITH SIDE SHIELDS. WEAR HEARING PROTECTION.

EMPLOYERS AND USERS ARE RESPONSIBLE FOR ENSURING THE

USER OR ANYONE NEAR THE TOOL WEARS THIS SAFETY

PREPARATION

PROTECTION.

This roofer is supplier with a Milton 727 type air coupler. If another

type coupler is required, use a free flow quick connect fitting on the

tool. (See Fig. 1)

Add a few drops of part number 403720 pneumatic oil into the air inlet.

(See Fig. 2)

Empty the nail and cap magazines.

Connect the tool to an air compressor using a 3/8" I.D. hose. Make

sure the hose has a rated working pressure exceeding 200 PSI and a

female quick coupler. (See Fig. 3)

Regulate the air pressure to obtain 80 PSI at the tool. Check the

operation of the contact safety trip mechanism following the

instructions in this manual. (See Fig. 4)

Disconnect the air supply from the tool.

Load nails into your tool following the instructions in this manual. (See

Fig. 5)

Load caps into your tool following the instructions in this manual. (See

Fig 6)

Reconnect the air supply to the tool.

Test for proper nail penetration by driving nails into a sample piece of

wood. If the nails do not achieve the desired penetration, check that

pressure is adjusted to at least 100 psi. Then adjust depth stop on back

of roofer until desired penetration is reached. (See Fig. 7) Do not

exceed 120 PSI at the tool.

Set the Switch at the top of the tool "On" for cap feed or "Off" for

applying roofing nails only. (See Fig 8)

(3)