- ページ 16

電動工具 DUO-FAST DFCR175CのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DUO-FAST DFCR175C 18 ページ。 Cordless roofing coil nailer

ページを印刷する

Servicing

Air Filter

Open the grille by pressing slightly above the adapter and

pivoting the cover open. The air filter simply lifts out.

Tap the filter GENTLY to remove any dust. Check and clean

the air filter every two days. Soap and water restores the

filter to a "like new" condition.

End-of-Workday Routine

These simple steps are based on maintaining the safety

and operational efficiency of the Cordless Roofing Nailer.

Before you leave the work site:

1. Remove battery and store in tool case. Always use

the Cordless Roofing Nailer case for transporting

and storing the tool.

2. Dispose of all empty fuel cartridges. Remember to

dispose of these cartridges where they will not be

crushed, punctured, burned or found by children.

When you get home:

1. Place the battery in its charger if it needs charging as

indicated by the red charge light on the handle.

2. Wipe your Cordless Roofing Nailer with a clean, soft

cloth.

3. Remove and clean the filter every two days.

4. Check work contacting element and the nail feed area to

ensure it is operating freely. Remove any tar build-up

with Paslode Cordless Tool Cleaner.

GRILLE

Duo-Fast

A variety of accessories are available for the Duo-Fast

Cordless Roofing Nailer:

FILTER

Battery - Part No. 902336

Clear Safety Glasses - Part No. 401382

Duo-Fast

Battery Charger Kit - Part No. 902327

CAP

Automotive Adapter - Part No. 902333

Backpack Tool Case - Part No. 904605

Cordless Tool Cleaner - Part No. 219348

Tool Safety Tether - Part No. 904548

Contact your Duo-Fast

information.

Tools

A 5/32 Hex Wrench (Part No. 401331), 9/64 Hex Wrench

(Part No. 900736), and a 3/16 Hex Wrench ( Part No.50144)

are provided with each cordless roofing nailer.

Cordless Tool Accessories

Cordless Lubricating Oil - Part No. 902331

representative for additional