- ページ 10

エアコン Duo-Therm 57915.531のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Duo-Therm 57915.531 17 ページ。 Roof top air conditioner/heat pump
Duo-Therm 57915.531 にも：据付・取扱説明書 (17 ページ)

ページを印刷する

A. Remove parts package, control box and thermostat from the 3107541.XXX or 3107546.XXX Control Kit carton.

B. Freeze Control Installation 579, 590, 591, & 595 Series Brisk Air Models (See FIG. 7.)

1. Snap freeze control into place on return bend located at left side of evaporator coil as follows:

a. Locate "D" shaped notch in flange of evaporator coil.

b. Place the horseshoe end of the freeze control through this notch and snap onto the coil return bend. When positioned

correctly, control wires will be 90

c. Remove installation notice hang tag from freeze control.

C. Freeze Control installation on 600 Series Penguin Models (See FIG. 8.)

1. Snap freeze control into place on return bend located at right side of evaporator coil as follows:

a. Locate "D" shaped notch in flange of evaporator coil.

b. Place the horseshoe end of the freeze control through this notch and snap onto the coil return bend. When positioned

correctly, control wires will be 90

c. Remove installation notice hang tag from freeze control.

ANALOG DUCTED INSTALLATION INSTRUCTIONS

8. INSTALLATION OF COLD CONTROL

to direction of coil fin surface.

Brisk Air Model Series

FIG. 7

579, 590, 591, & 595

Coil

Return

Bend

Freeze Control

With Wires To Left Side

to direction of coil fin surface.

Penguin Model Series 600

FIG. 8

Remove

Hang Tag