- ページ 2
ガス検知器 Duomo BX150のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Duomo BX150 7 ページ。 Gas detection controller
Duomo BX150 にも： マニュアル (12 ページ)
ページを印刷する
Overall Dimensions
48mm
Power
Battery
%LEL
8
13
20
ppm 120
200
300
Pre Alarm
Alarm
Gas
CO
Fault
Test
Over Load
Reset
Sensor
Battery
DUOMO
BX150
BX150 Fascia
1
3
4
6
11
12
Key
1. Power On - Lights when supply voltage is applied. This light flashes during self diagnostics start up.
2. Battery - This lights when the BX150 is being powered by the standby battery. When this light flashes the standby battery has low charge.
3. Gas Level Indicators - Displays current level of gas detected*.
4. Pre-alarm LED - These lights indicate the level of gas sensed. 8 - 13 - 20% LEL and 120 - 200 -300ppm.
5. Main Alarm - 20% LEL concentration of gas detected. Main alarm relay actuated.
6. Explosive - This lights when the internal DIP switch for explosive gas is moved to the gas position.
7. Toxic Gas - This lights when the internal DIP switch for carbon monoxide is moved to the carbon monoxide position.
8. Fault - Indicates a short circuit, sensor fault, loss of signal or incorrect connection of the sensor.
9. Over Load Sensor - Short circuit or high current absoprtion in the sensors.
10. Over Load Battery - Battery not connected properly or anomalous voltage consumption.
11. Test - When pressed checks the sequence and function of the BX150.
12. Reset - Press this to reset the detector after an alarm or sensor fault condition.
13. Switches - These are used to turn the sensor on/off, determine the type of gas to be sensed, to turn the intrinsically safe option on and off
and alter the alarm actuation.
14. Signal Terminal Block - Sensor terminals.
15. Power Terminal Block - Power terminals.
w: www.duomo.co.uk
120mm
110mm
Power
Battery
%LEL
8
13
20
ppm 120
200
300
Pre Alarm
Alarm
CO
Gas
Fault
Test
Over Load
Reset
Sensor
Battery
DUOMO
BX150
-
Cutout Dimensions
2
5
7
8
9
10
-
t: 01905 797989
-
46mm
14
f: 01905 774296
|
© Duomo (UK) Ltd. 2007
13
15