- ページ 12

水族館 Dupla MultiControlのPDF 使用説明書をオンラインで閲覧またはダウンロードできます。Dupla MultiControl 16 ページ。
Dupla MultiControl にも：使用説明書 (16 ページ)

5.9

Setting Calibration Memory

Press "Menu" key, "On" display flashes.

Set key to "Off" with the ▲ or ▼ key to turn off memory function.

Acknowledge with "Menu" to return to the main menu.

Scroll through to the next menu item with ▲ key.

Press "Menu" key, "00:" flashes.

Set the current time in hours with the ▲ or ▼ key.

Acknowledge with "Menu", ":00" flashes.

Set the current time in minutes with the ▲ or ▼ key.

Acknowledge with "Menu", "Mo" flashes.

Set the current week day with the ▲ or ▼ key.

Acknowledge with "Menu" to return to the main menu.

Scroll through to the next menu item with the ▲ key.

To finish programming, hold "Menu" key down until display changes.

6. Factory Setting / Reset

Target temperature water heating:

Difference heating / cooling differential: 3.0° C

Target pH control:

Calibration memory function:

Time switch position 2:

Should your aquarium computer not be working correctly, please carry out a reset as follows:

1. Switch off power to MultiControl.

2. Turn power back on again while holding down the "Menu" key.

3. Release "Menu" key.

Caution: Activating the reset function will result in a loss of all programmed settings.

25.0° C

Target temperature substrate heating: 25.1° C

Temperature Alarm:

pH Alarm:

Time switch position 1:

Off

Time switch position 3:

3° C (off)

0.5 (off)

Off