- ページ 11

インターホン・システム Audiocom Audiocom BP-1002のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Audiocom Audiocom BP-1002 18 ページ。 Beltpacks audicom intercom systems

Internal Switches, Jumpers, and Adjustments

FIGURE 2.

NOTE:

Figure 2 shows a BP-2002 with the switches and jumpers in their factory

default positions. SW5 does not exist on the BP-1002 board.

The Sidetone and Mic Gain adjustment are also accessible behind the screw that holds

the belt clip (callout 5 in Figure 1)

The functions of the internal switches and jumpers are described in Table 2 on page 8.

Sidetone Adjustment (R145)

The sidetone adjustment is accessible either internally (refer to Figure 3) or by

removing the belt clip mounting screw (callout 5 in Figure 1 on page 2).

To adjust the level of your own voice heard in the headphones, tap the Talk button

once to turn ON the headset microphone. Then, use a small Phillips head screwdriver

to increase or decrease your voice level while talking into the microphone.

The Mic Gain Adjustment is accessible internally on the board (R156) (refer to

Figure 3) or by removing the belt clip mounting screw (callout 5 in Figure 1 on

page 2).

Operation