- ページ 7
レンズ FREEDEO TURBO SCREEN FD-T05FのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。FREEDEO TURBO SCREEN FD-T05F 10 ページ。 Passive 3d cinema system
ページを印刷する
7. System Connection
7.1 System Connection
Optical Unit (MOTOR interface)------- Motorized bracket（Motor driving signal interface）
Optical Unit (SYNC interface) --------- Digital Projector (GPI / O or 3D Interface )
Optical Unit (POWER interface) ------- Power Adapter (24V 3.75A input)
L/R Polarity Switch
Motor driving signal Interface
Power Input Interface
Power Switch
ON/OFF
L/R
POWER
L/R
SYNC
POWER
24V 3.75A Power Output
3
Connect power cord
100~240V AC Power Input
1
M o t o r d r i v i n g
signal Interface
Figure 7-1 System Connection
9/15
SYNC Interface
MOTOR
SYNC
2
Connect SYNC
Connect motor driving
signal cable
Connect digital
rojector
or
3D Interface
GPI/O Interface
(15pin)
(37pin )
7.2 LED status indicators
After the connection is completed, turn on the system and digital projector
to play 3D movie, check the cables are connected correctly by observing
the LED status indicators on the front panel, as shown in Figure 7-2.
Turn on the system and digital projector to
play 3D movie, check the LED status indicator
L/R Polarity Switch
ON/OFF
L/R
POWER
L/R
SYNC
POWER
SYNC indicator
L/R Signal Indicator LED
Power Switch
Power indicator
Figure 7-2 LED Status Indicators
POWER indicator:
when illuminate green, status ok. When off, check the power cord is
connected properly.
SYNC indicator:
When illuminated green, 3D signal is detected. When off, not detected,
check the 3D sync cable is connected properly and the projector is set
correctly.
L / R indicator:
When illuminated green, L/R polarity signal is detected. Press L / R button
to switch left/right picture if the screen image is not correct.
MOTOR
SYNC
10/15