- ページ 8

メディア・コンバーター AudioControl LC7iのPDF マニュアルをオンラインで閲覧またはダウンロードできます。AudioControl LC7i 16 ページ。 Six channel line output converter with accubass for interfacing with factory installed audio systems

ページを印刷する

Awesome Information

AccuBASS™ Processing

Factory installed amplifiers and speakers are NOT designed to

reproduce bass frequencies at high volume levels. These factory

systems actually remove the bass when you turn up the volume!

AudioControl developed the patent pending AccuBASS™ circuit

to restore the bass that the factory takes away. After a quick and

easy one-time setting, the AccuBASS™ circuit adds the bass just

as the factory system rolls off. You get smooth, seamless, and rock

solid bass response regardless of volume level. The chart below

shows how the AccuBASS™ operates to correct for the factory

bass roll-off.

cuBASS™ Level Control to the 12:00 position.

• Turn the Threshold fully down (counter clockwise).

• Now turn up the volume on your stereo until you hear the bass

start

and leave the

volume there.

• Slowly turn up the Threshold control until you hear the bass

come back up and leave it in that position.

• Adjust the level control to fine tune the amount of bass restora-

tion you want.

• You're done! Now, every time the stereo gets to that volume, the

AccuBASS™ will take over and restore the bass. You have

smooth, seamless bass at all volumes and you can even use the

level control to give a little extra kick to the bass if you want. It's

your music your way!

to drop out in relationship to the high frequencies

Setting the Accu-

BASS™ is a simple one-

time operation:

After you have hooked

up the system and are

listening to music, play

something with a good

bass line, and set the vol-

ume at low.

• On the LC7i, set the Ac-

page 8