- ページ 2

レシーバー AudioControl BVR-10のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。AudioControl BVR-10 20 ページ。 Cat-5 balanced video/audio driver cat-5 balanced video/audio receiver active-balanced series

ページを印刷する

CTIVE

The Most Important Instruction Of All

FILL OUT AND SEND IN THE WARRANTY CARD!

Also, save the invoice or sales slip as proof of purchase.

These actions will protect this investment and help prove

that such a handy piece of audio equipment was really in the

system.

EFORE

For the best product performance and the lowest use of

pain-killers, nothing is better than a well-planned profes-

sional system installation. Before you start pulling wires,

sketch out a full layout of the complete system. This will

help plan the wire routing and minimize the "gotchas" later

on. Happy installing.

Mounting The BVD-10 / BVR-10

The small size and low power draw of these units allow

them to be mounted in almost any dry indoor location. Pick

mounting locations close to the units that will be connected

to the BVD-10 or BVR-10. This keeps the unbalanced

audio and video signal cables as short as possible since they

are more susceptible to noise pickup than the balanced Cat-

5 cables. There is no heat build-up problem, so it is okay to

put the BVD-10/BVR-10 in a closed area. Just remember

you need to at least be able to reach the units.

Important Note: When routing the 24 volt AC

power wiring from the wall plug transformer; make

certain that you do not run the power wiring near or

parallel to the signal cables. You may pick up AC hum.

-B

ALANCED

EGIN