ページを印刷するOnce the base location has been set, you will need to set up the
perimeter.
There are two methods to change and set the perimeter of the
geozone.
The Click and Drag Method:
To set the radius, simply click and drag the grey pushpin on the edge
of the circle to the desired distance. Click the "Save" button in the left
hand side to save this geozone.
The Radius Method:
To set the radius, enter the distance in the "Radius" field and click
the "Preview" button to update the map. Note that the distance is
portrayed in meters. Click the "Save" button in the left hand side to
save this geozone.
You can change the geozone as many times as you like depending on
the wearer's location for a specific time period. For example, you can
set the geozone to a permanent address and then reset it to another
location (i.e. vacation location, new home, etc.).
Geozone Labeling & Preferences:
You can label the geozone you set up allowing you to easily identify the
wearer's location. In the "Zone Description" field, name the geozone
that was set up. For example, "My house". This label should be
changed every time you set a new geozone.
Alerts:
To receive email or SMS alerts pertaining to battery life or geozone
tracking, enter the email address and/or mobile phone number in the
"Email or Mobile Phone" field. You may enter as many as you like,
separating them by commas. For example,
2128503215, [email protected]. Note that if you leave this field
blank, you will not receive any alerts. Make sure you enter a mobile
number and/or email address you check frequently.
Types of Alerts:
Geozone Arrival Alert:
To receive an alert via email or SMS indicating the person wearing the
Aetrex GPS Shoes has entered the geozone, check the "Arrival Zone"
box.
12
Example of an arrival alert:
Arrival zone alert - "Entered My house Geozone at 2011/10/13
08:49:51 PST...Location: 855 S hill St, Los Angeles, CA 90014, USA;
Geozone Departure Alert:
To receive an alert via email or SMS indicating the person wearing the
Aetrex GPS Shoes has left the geozone, check the "Departure Zone"
box.
Example of a departure alert:
Departure zone alert - "Exited My house Geozone at 2011/10/13
08:49:51 PST...Location: 855 S hill St, Los Angeles, CA 90014, USA;
If you check the "Reverse Geocode" box, the alerts you receive will
simply indicate the geozone description or label you set up rather than
the actual street address. For example, when you receive an alert for
"Arrival Zone", it will say "Entered My House Geozone" and not the
specific address.
Reports:
There are three tracking reports that can be generated, each
highlighting and categorizing different data for a specific date or date
range.
To run any of the three reports, click the "Reports" tab. From the drop
down menu pick the desired report.
To select the date ranges for any of the three reports:
The date range on the top left hand side allows you to select the
beginning and end tracking dates of the report.
To change the beginning date:
Using the arrow buttons in the "From" calendar, select the starting
month followed by the day.
To change the end date:
Using the arrow buttons in the "To" calendar, select the end month
followed by the day.
Always pick the "HTML" format from the "Format" drop down
menu to generate your reports.
13